Madi Bath/Shower Mixer
RRP: $399.00
Introduce a stylish and practical presence to your bathroom with the Linsol Madi Wall Mixer. Showcasing a brass construction with a chrome-plated finish, the Linsol Madi Wall Mixer ties in well with your contemporary bathroom motif. Allowing you to control water output from a shower or a bath spout, this mixer is integrated with anti-scald technology, optimising hot water flow.
- Barcode: 933989700484
- Material: Brass
- Finish: Chrome
- Cartridge: 25mm 2-Step
- Brand:
Anti-Scald Technology
25 Year In-House Warranty
Made in Italy
Installation
- All tapware must be installed by a licensed plumber.
- All tapware must be installed to AS/NZS 3500 Series Standards.
- Isolating stop valve must be installed with all applicable tapware.
- All new connections must be flushed before installing any tapware to remove and shavings or impurities from water lines.
- If the incoming water pressure exceeds 1200kpa an approved pressure limiting valve must be used.
- This tapware has not been tested for water pressure under 150kpa.
**Failure to comply with any of the above will void all warranties.
Care Instructions
Cleaning
- A soft cloth is ideal for cleaning all chrome-plated tapware.
- Never use an abrasive or harsh substance. Use only mild liquid detergent to remove built-up and tough surface film.
- Regular cleaning with a soft cotton or microfiber cloth will keep your Madi shower/bath mixer looking as good as the day you installed it.
Technical Information
